Lower timber 2 by four inches to the peak and width of the sliding barn door to create the construction. For a stronger construction, timber stacks two 2 by four or makes use of beams four by four inches (10 by 10 cm). Assemble the construction utilizing steel brackets and galvanized nails or screws. Lower a cross brace and set up it within the middle of the construction. Lower the boards to the peak of the barn door and place on the construction. Sujétalas to the construction utilizing screws or galvanized nails. Use slightly glue or adhesive to bolster them.
Mount the sliding barn door observe to the highest of the construction, utilizing an correct carpenter’s stage. Wooden screws utilizing an electrical screwdriver and for mounting the rail to the construction. Monta three or 4 wheels to rails on the backside of the barn door if the door will slide on the ground. If the underside of the door is greater than the bottom, which is the case in case your barn has a ramp on the entrance, one other lane mounted on the underside of the door.
The rails for sliding barn door could also be situated at any fringe of the construction. Measure the gap between the rails mounted, after which putting in rails for partitions.
Popular Search Term antique pocket door hardware, vintage sliding barn door, unique sliding barn door ideas, sliding barn door picture, sliding barn door image, sliding barn door ideas, sliding barn door bathroom, sliding barn door, single sliding barn door, redo sliding barn door, red wood sliding barn door, oak sliding barn door, antique sliding barn door, wood sliding barn door